sudo配置文件/etc/sudoers详解及实战用法 | 您所在的位置:网站首页 › linux sudoers详解 › sudo配置文件/etc/sudoers详解及实战用法 |
一、sudo执行命令的流程 将当前用户切换到超级用户下,或切换到指定的用户下, 然后以超级用户或其指定切换到的用户身份执行命令,执行完成后,直接退回到当前用户。 具体工作过程如下: 当用户执行sudo时,系统会主动寻找/etc/sudoers文件,判断该用户是否有执行sudo的权限 -->确认用户具有可执行sudo的权限后,让用户输入用户自己的密码确认 -->若密码输入成功,则开始执行sudo后续的命令 二、不需要输入密码的情况 1.root执行sudo时不需要输入密码(eudoers文件中有配置root ALL=(ALL) ALL这样一条规则) 2.欲切换的身份与执行者的身份相同,不需要输入密码 3./etc/sudoers文件设置为允许用户在不输入该用户的密码的情况下使用所有命令 如设置允许wheel用户组中的用户在不输入该用户的密码的情况下使用所有命令 ( %wheel ALL=(ALL) NOPASSWD: ALL) 三、/etc/sudoers文件解释 [root@test ~]# cat /etc/sudoers ## Sudoers allows particular users to run various commands as ## the root user, without needing the root password. ##该文件允许特定用户像root用户一样使用各种各样的命令,而不需要root用户的密码 ## ## Examples are provided at the bottom of the file for collections ## of related commands, which can then be delegated out to particular ## users or groups. ## 在文件的底部提供了很多相关命令的示例以供选择,这些示例都可以被特定用户或 ## ## 用户组所使用 ## This file must be edited with the 'visudo' command. ## 该文件必须使用"visudo"命令编辑 ## Host Aliases #主机别名 ## Groups of machines. You may prefer to use hostnames (perhap using ## wildcards for entire domains) or IP addresses instead. ## 对于一组服务器,你可能会更喜欢使用主机名(可能是全域名的通配符) ## 或IP地址代替,这时可以配置主机别名 # Host_Alias FILESERVERS = fs1, fs2 # Host_Alias MAILSERVERS = smtp, smtp2 ## User Aliases #用户别名 ## These aren't often necessary, as you can use regular groups ## (ie, from files, LDAP, NIS, etc) in this file - just use %groupname ## rather than USERALIAS ## 这并不很常用,因为你可以通过使用组来代替一组用户的别名 # User_Alias ADMINS = jsmith, mikem ## Command Aliases ## These are groups of related commands... ## 指定一系列相互关联的命令(当然可以是一个)的别名,通过赋予该别名sudo权限, ## 可以通过sudo调用所有别名包含的命令,下面是一些示例 ## Networking #网络操作相关命令别名 Cmnd_Alias NETWORKING = /sbin/route, /sbin/ifconfig, /bin/ping, /sbin/dhclient, /usr/bin/net, /sbin/iptables, /usr/bin/rfcomm, /usr/bin/wvdial, /sbin/iwconfig, /sbin/mii-tool ## Installation and management of software #软件安装管理相关命令别名 Cmnd_Alias SOFTWARE = /bin/rpm, /usr/bin/up2date, /usr/bin/yum ## Services #服务相关命令别名 Cmnd_Alias SERVICES = /sbin/service, /sbin/chkconfig ## Updating the locate database #本地数据库升级命令别名 Cmnd_Alias LOCATE = /usr/sbin/updatedb ## Storage #磁盘操作相关命令别名 Cmnd_Alias STORAGE = /sbin/fdisk, /sbin/sfdisk, /sbin/parted, /sbin/partprobe, /bin/mount, /bin/umount ## Delegating permissions #代理权限相关命令别名 Cmnd_Alias DELEGATING = /usr/sbin/visudo, /bin/chown, /bin/chmod, /bin/chgrp ## Processes #进程相关命令别名 Cmnd_Alias PROCESSES = /bin/nice, /bin/kill, /usr/bin/kill, /usr/bin/killall ## Drivers #驱动命令别名 Cmnd_Alias DRIVERS = /sbin/modprobe #环境变量的相关配置 # Defaults specification # # Disable "ssh hostname sudo ", because it will show the password in clear. # You have to run "ssh -t hostname sudo ". # Defaults requiretty Defaults env_reset Defaults env_keep = "COLORS DISPLAY HOSTNAME HISTSIZE INPUTRC KDEDIR \ LS_COLORS MAIL PS1 PS2 QTDIR USERNAME \ LANG LC_ADDRESS LC_CTYPE LC_COLLATE LC_IDENTIFICATION \ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC \ LC_PAPER LC_TELEPHONE LC_TIME LC_ALL LANGUAGE LINGUAS \ _XKB_CHARSET XAUTHORITY" ## Next comes the main part: which users can run what software on ## which machines (the sudoers file can be shared between multiple ## systems). ## 下面是规则配置:什么用户在哪台服务器上可以执行哪些命令(sudoers文件可以在多个系统上共享) ## Syntax: ##语法 ## user MACHINE=COMMANDS ## 用户 登录的主机=(可以变换的身份) 可以执行的命令 ## ## The COMMANDS section may have other options added to it. ## 命令部分可以附带一些其它的选项 ## ## Allow root to run any commands anywhere ## 允许root用户执行任意路径下的任意命令 root ALL=(ALL) ALL ## Allows members of the 'sys' group to run networking, software, ## service management apps and more. # %sys ALL = NETWORKING, SOFTWARE, SERVICES, STORAGE, DELEGATING, PROCESSES, LOCATE, DRIVERS ## 允许sys中户组中的用户使用NETWORKING等所有别名中配置的命令 ## Allows people in group wheel to run all commands # %wheel ALL=(ALL) ALL ## 允许wheel用户组中的用户执行所有命令 ## Same thing without a password ## 允许wheel用户组中的用户在不输入该用户的密码的情况下使用所有命令 # %wheel ALL=(ALL) NOPASSWD: ALL ## Allows members of the users group to mount and unmount the ## cdrom as root ## 允许users用户组中的用户像root用户一样使用mount、unmount、chrom命令 # %users ALL=/sbin/mount /mnt/cdrom, /sbin/umount /mnt/cdrom ## Allows members of the users group to shutdown this system # %users localhost=/sbin/shutdown -h now ## 允许users用户组中的用户像root用户一样使用shutdown命令 四、实际案例演示 实例1:让普通用户fieldyang具有/etc/init.d/nagios脚本重启的权限,可以在/etc/sudoers添加如下设置: [root@test ~]# visudo fieldyang ALL=NOPASSWD:/etc/init.d/nagios restart 实例2:让普通用户fieldyang具有所有超级用户的权限而又不用输入密码 [root@test ~]# visudo fieldyang ALL=(ALL)NOPASSWD:ALL [fieldyang@test ~]#sudo su - [fieldyang@test ~]#pwd /root 实例3:针对MySQL数据库的设置,让test组中的test用户具备/etc/init.d/mysqld的权限 ######################## mysql ################ 1. [root@test ~]# groupadd test [root@test ~]# useradd -g test -m -d /home/test -s /bin/bash test [root@test ~]# passwd test 2. [root@test ~]# visudo # test ALL=(ALL) NOPASSWD: /etc/init.d/mysqld test ALL=(ALL) /etc/init.d/mysqld 3. start/stop mysql 3.1) start mysql login test [root@test ~]# su test [test@test ~]$ sudo /etc/init.d/mysqld start 3.2) stop mysql login test [root@test ~]# su test [test@test ~]$ sudo /etc/init.d/mysqld stop 实例4:针对tomcat的设置,让test组中的test用户具备tomcat操作的权限 ######################## tomcat ################ 1. [root@test ~]# groupadd test [root@test ~]# useradd -g test -m -d /home/test -s /bin/bash test [root@test ~]# passwd test 2. [root@test ~]# visudo # test ALL=(ALL) /usr/local/tomcat/bin/shutdown.sh,/usr/local/tomcat/bin/startup.sh test ALL=(ALL) NOPASSWD: /usr/local/tomcat/bin/shutdown.sh,/usr/local/tomcat/bin/startup.sh 3. [root@test ~]# vim /usr/local/tomcat/bin/catalina.sh ### JDK export JAVA_HOME=/usr/local/jdk export JRE_HOME=$JAVA_HOME/jre 4. start/stop tomcat 4.1) start tomcat login test [root@test ~]# su test [test@test ~]$ sudo /usr/local/tomcat/bin/startup.sh [test@test ~]$ ss -ntlup | grep Java [test@test ~]$ curl -I http://localhost:8080 4.2) stop tomcat login test [root@test ~]# su test [test@test ~]$ sudo /usr/local/tomcat/bin/shutdown.sh 本文转自yzy121403725 51CTO博客,原文链接:http://blog.51cto.com/lookingdream/1841076 ,如需转载请自行联系原作者 |
CopyRight 2018-2019 实验室设备网 版权所有 |